« Special Delivery: Packing and Shipping Baked Goods | Main | O Tannenbaum: Top 9 Tips for Tree Decorating »
Fantastic Plastic: PVC Wreath
14
With less than two weeks to go until the big day we wanted to bring you a cool idea for a modern wreath. This is one of my favorite ideas for the holidays. The variety of sizes is what really makes this project successful. It almost looks like bubbles when you look at it head on.
We finished our project for today’s post in glossy white, but I can imagine it in many other finishes. Leave the wreath as is or try filling the bigger tubes with ornaments or other holiday touches.
savour… clever holiday crafts
Get the rest after the jump…
PVC Wreath
Before you start:
Be sure to evenly distribute the sizes of tubes. This will make all the difference.
Take measurements if necessary to ensure that the wreath remains about the same size all the way around.
A table saw or box saw are important here as they will help to maintain a level edge.
If one end of the tube gets messed up during cutting place it bad end up in your arrangement. It won’t be seen in the finished product.
Don’t skip any joints if possible. Each bond makes the wreath a little stronger overall.
Apply adhesive liberally.
Make sure you use the adhesive in a well-ventilated area.
The materials:
- PVC pipes in a variety of diameters – the example is made of 5 foot lengths right from the hardware store shelf.
- PVC cement (16 oz can)
- Spray paint
- Sandpaper
The steps:
- Cut the pipes into 5 inch pieces with a table saw or a box saw.
- Peel off any stickers, lightly sand edges as needed, and wipe off dirt with a damp cloth.
- On a flat surface, lay the pipe pieces out in a pattern with the sizes evenly distributed around the wreath. Use a round object in the center as your guide such as a mixing bowl.
- When you are satisfied with your layout gently move all but the innermost circle back just a few inches.
- Apply PVC cement to the both sides of two of the tubes where they are to be joined. Hold together for 30 seconds. Release.
- Repeat this process all the way around the circle.
- Begin adding the remaining pieces by applying adhesive to both surfaces where any and every joint will be made.
- Allow proper drying time (about 2 hours) before continuing.
- Turn wreath over and clean the front of your wreath before painting.
- Spray paint the wreath following the paint manufacturer’s instructions.
TrackBack
TrackBack URL for this entry:
http://www.typepad.com/services/trackback/6a0120a8a2f331970b0147e0aa132f970b
Listed below are links to weblogs that reference Fantastic Plastic: PVC Wreath:
Comments
You can follow this conversation by subscribing to the comment feed for this post.
Verify your Comment
Previewing your Comment
This is only a preview. Your comment has not yet been posted.
As a final step before posting your comment, enter the letters and numbers you see in the image below. This prevents automated programs from posting comments.
Having trouble reading this image? View an alternate.
I'm speechless!
Posted by: mike | 12/14/2010 at 09:38 AM
I knew you would like it, Mike! Thanks for flying by the Nest.
Posted by: Sam | 12/14/2010 at 11:01 AM
LOOOOOOOOOOOve this! It's so modern.
Posted by: Tonia | 12/14/2010 at 12:30 PM
Thanks, Tonia! It's my new favorite.
Posted by: Sam | 12/14/2010 at 12:41 PM
Wow! That looks amazing!
Posted by: valerie | 12/14/2010 at 02:38 PM
It rocks.....very clever indeed.
Posted by: L Belle | 12/14/2010 at 05:55 PM
This is so VERY cool and innovative. I NEVER would have thought of this :) Love it!
Posted by: sharon @ layers and layers | 12/14/2010 at 06:47 PM
Thanks, ladies, for your comments. This is my current favorite project for this holiday season. Simple and stunning!
Posted by: Sam | 12/14/2010 at 09:48 PM
Very cool! Looks like a lot of work, but it is beautiful and I love that you can nest things in it!
Posted by: Stephanie | 12/14/2010 at 11:56 PM
Coolest wreath I've ever seen. Ever! You guys continue to amaze me.
Posted by: LHudson | 12/15/2010 at 12:02 AM
Once again, another amazingly cool, larger than life piece of wall art! I know exactly where I would put this...but I have to wonder how well paint holds to PVC. The stuff they sell here is orange and gray for plumbing use. Ugh. But it should still probably work despite the extra work!
Posted by: Tiffany @ No Ordinary Homestead | 12/15/2010 at 06:13 AM
@Stephanie, it's a little tedious, but once you get on a roll it goes rather quickly. The reward is worth the effort.
@LHudson, you're too sweet. Thanks for hanging around the Nest this year.
@Tiffany, the PVC holds paint well. Although smooth, the material has a bit of 'tooth'. For further security you might try priming first or a plastic fusion spray paint. Make it! You will love it.
Posted by: Sam | 12/15/2010 at 07:50 AM
GREAT
Posted by: Deepali Kalia | 12/15/2010 at 11:16 AM
What a new take on the wreath. Never worked with PVC cement before.
Posted by: EarthtoGirl | 12/17/2010 at 01:08 PM
EarthtoGirl, I am so glad you flew by the Nest. I hope you will return often.
Working with PVC cement is a breeze. Speaking of breeze, make sure you have one... and some ventilation. I am fairly sure you can get high off of it.
Posted by: Sam | 12/17/2010 at 01:12 PM
This is beautiful!!
Posted by: Sue | 12/20/2010 at 08:40 AM
We made it! Turned out beautifully and my in-laws were totally impressed with it. Will be making another one for ourselves since we gifted the first one. Had to blog about our building experience of course on NOH! http://www.noordinaryhomestead.com/farm-life/build-a-pvc-wreath-for-next-christmas/
Thanks again for the inspiration, Sam!
Posted by: Tiffany at No Ordinary Homestead | 12/31/2010 at 07:34 AM
Tiffany, I am so glad that you made it. It looks amazing!
Posted by: Sam | 12/31/2010 at 08:08 AM
Glad to know friends like you.
Posted by: coach outlet | 01/12/2011 at 12:14 AM
I love this, I am so sick of seeing the traditional wreaths, thanks for the modern touch! I am going to try it!
Posted by: Leslie | 11/18/2011 at 09:20 PM
Thank you Leslie! Glad you liked it.
Posted by: Sam | 11/22/2011 at 08:47 PM
This is really cool - I will have to try this when I get a saw.
Posted by: Sandy Karsten | 12/12/2011 at 05:58 PM
I like the creativity behind the project.. I will look forward to the post and create my own with the help and reference of this share... Good share..!!!
Posted by: nylon screw | 04/09/2012 at 03:55 AM